 |
|||||||||||
 |
 |
 |
 |
 |
 |
||||||
| |
|||||||||||
Gas and Vapor Sampling
SKC Sorbent Sample Tubes for Active Sampling
 |
Sorbent Tubes Listed by SKC Catalog Number Sorbent Tubes Listed by Sorbent Search for Methods for SKC Sorbent Tubes Custom Sorbent Tubes Order Form (PDF) Flow Rate Effect on Backpressure Across SKC Sorbent Tube 226-01 (PDF) Anasorb CSC (Coconut Shell Charcoal) Lot 2000 Desorption Efficiencies Sorbent Tube Certificates of Quality/Operating Instructions Sorbent Certificates of Analysis How Sorbent Tube Sampling Works Sorbent Tube Expiration Dates
|
 |
Sorbent Tube Holders and Accessories Adjustable Low Flow Tube Holders, Plastic Protective Covers, Constant Pressure Controllers (CPC), Low Flow Adapter Kits, and other accessories |
 |
Bulk Sorbents SKC bulk sorbent materials meet stringent specifications for environmental applications and undergo extensive cleaning procedures to assure low backgrounds. A wide range of sorbents are available. |
 |
Drying Tubes For sampling moisture-sensitive compounds, SKC offers a pre-drying tube. The sorbent (sodium sulfate) removes moisture while other chemicals in the airstream pass through unaffected. |
 |
Formaldehyde Sampling Tubes SKC sorbent sample tubes meet the specifications of EPA Method TO-11A and ASTM Method D 5197 for the determination of formaldehyde (and other aldehyde) concentrations in ambient air without the incompatibility and breakthrough problems of the cartridges specified in EPA TO-11 and EPA IP6A. |
 |
Hydrogen Sulfide
and Sulfur Dioxide Tubes This SKC sorbent tube is designed to meet the specifications of OSHA Method 1008 for hydrogen sulfide and OSHA Method 1011 for Sulfur Dioxide. |
 |
OSHA Versatile Sampler (OVS)
Tubes The unique construction of this versatile tube allows for the simultaneous collection of aerosols and vapors. Originally designed by OSHA to overcome some of the inconveniences of earlier methods, it is often referred to as the OSHA Versatile Sampler (OVS). This specially designed glass tube contains a filter to trap aerosols and a two-section sorbent bed to adsorb vapors. |
 |
High
Volume PUF
(Polyurethane Foam) Tubes Designed to meet EPA and ASTM method specifications for high flow sampling of organochloride pesticides, PCBs, and PAHs in ambient air. Use with flows from 200 to 280 L/min. |
 |
Low
Volume PUF (Polyurethane Foam) Low
Volume Tubes Designed to meet EPA and ASTM indoor and ambient air sampling methods for pesticides in homes, public buildings, and offices. Use with flows from 1 to 5 L/min. |
 |
CertaSpikes Sorbent
Tubes Customize CertaSpikes to your applications. Choose from a pre-priced tube/sorbent or a custom tube and sorbent to meet your application and number of compounds, compounds of interest, spike level(s) |
 |
Thermal Desorption Tubes Suitable for EPA to-17 Sampling of VOCs. SKC sorbent technology research has produced superior materials for the collection of organic compounds for thermal desorption. Thermal desorption techniques offer the advantage of greatly improved analytical sensitivity. Because a solvent is not used, the collected sample is not diluted and, in most cases, analytical recovery is so close to 100% that desorption efficiency corrections are not required |
 |
Treated Sorbent Tubes SKC offers a complete line of sample tubes with sorbents that have been washed, coated, or treated in a special way to better collect specific chemical hazards. For many airborne chemicals, these sorbents provide a suitable sampling alternative to wet chemistry methods using impingers. SKC provides treated sorbent sample tubes to meet published NIOSH and OSHA methods along with methods published by leading researchers. |
 |
Tubes
for Volatile Organic Compounds (VOCs) VOCs include hydrocarbons, oxygenated hydrocarbons, and organic compounds containing nitrogen or sulfur. VOCs are emitted from a variety of industrial and commercial facilities into the atmosphere and pose a potential health hazard to industrial workers in particular and the public in general. SKC manufactures VOC sample tubes to meet published EPA air sampling methods. |
 |
Tubes
for Volatile Organic Sampling Trains (VOST) For sampling of volatile organic compounds (VOCs) and volatile principal organic hazardous constituents (POHCs) from stationary emission sources, including hazardous waste incinerators, EPA method 0031 uses a Volatile Organic Sampling Train or VOST sampler. |
| About SKC | Terms of Use | Privacy Policy | Contact Us | Site Map | Ordering Information |
SKC Inc.'s Quality Policy is in Compliance with IS0 9001-2000
© Copyright 1995-2012 SKC Inc